Hi,
I have done the OS/DB migration from HP UX 11.23 to win 200 Server and Oracle 10.2.0.2 to oracle 12c. Now system is perfectly working. DB is also up but even though I am getting 0012 error while running R3trans. here I am attaching the trans log for your reference.
4 ETW000 r3trans version 6.24 (release 721 - 14.10.14 - 20:14:08).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 29.06.2015 - 13:35:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Mon Jun 29 13:35:42 2015 102 0.000102
4 ETW000 [ dev trc,00000] db_con_init called 38 0.000140
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000 63 0.000203
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 28 0.000231
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 21 0.000252
4 ETW000 [ dev trc,00000] Loading DB library 'dboraslib.dll' ... 54 0.000306
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 000007FEEC170000
4 ETW000 1075 0.001381
4 ETW000 [ dev trc,00000] using "E:\usr\sap\ECD\SYS\exe\uc\NTAMD64\dboraslib.dll" 20 0.001401
4 ETW000 [ dev trc,00000] Library 'dboraslib.dll' loaded 23 0.001424
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dboraslib.dll 25 0.001449
4 ETW000 [ dev trc,00000] Version of 'dboraslib.dll' is "721.02", patchlevel (0.419) 138 0.001587
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dboraslib.dll 21 0.001608
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dboraslib.dll 41 0.001649
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=47=DBSL_CMD_IMP_FUNS_SET) -> changed=30, tagset=1
4 ETW000 175 0.001824
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=39=DBSL_CMD_SET_SINGLETASK) 25 0.001849
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET) 22 0.001871
4 ETW000 [ dev trc,00000] New connection 0 created 18 0.001889
4 ETW000 [ dev trc,00000] 00: name=R/3, con_id=-000000001, state=DISCONNECTED, tx=NO , bc=NO , hc=NO , perm=YES, reco=NO , info=NO ,
4 ETW000 timeout=000, con_max=255, con_opt=255, occ=NO , prog= 37 0.001926
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET) 26 0.001952
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 18 0.001970
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 25 0.001995
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 19 0.002014
4 ETW000 [ dev trc,00000] 00: name=R/3, con_id=000000000, state=DISCONNECTED, tx=NO , bc=NO , hc=NO , perm=YES, reco=NO , info=NO ,
4 ETW000 timeout=000, con_max=255, con_opt=255, occ=NO , prog= 34 0.002048
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 18 0.002066
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=74=DBSL_CMD_CON_INFO_EXT_SUPPORT) -> rc=0=DBSL_ERR_OK, con_vers=0
4 ETW000 119 0.002185
4 ETW000 [ dev trc,00000] con_info_ext_support(): DBSL supports extended connect protocol 38 0.002223
4 ETW000 ==> connect info for default DB will be read from ssfs
4 ETW000 [ dev trc,00000] con_info_ext_support(): auth/shadow_upgrade = undefined 38 0.002261
4 ETW000 ==> Using default key set to get connect info from ssfs
4 ETW000 [ dev trc,00000] read_ssfs_record(): register callback ssfs_dbi_trace and max level 2
4 ETW000 33 0.002294
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [rsecssfs.c 872] 48 0.002342
4 ETW000 [dbcon.c ,00000] *** ERROR => RSecSSFs: SAP-Profile is not used; in this case, all three environment parameters SAPSYSTEMNAME, RSEC_SSFS_DATAPATH and RSEC_SSFS_KEYPATH must exist and have non-initial values [rsecssfs.c 4630]
4 ETW000 142 0.002484
4 ETW000 [dbcon.c ,00000] *** ERROR => RSecSSFs: SAP-Profile is not used; in this case, all three environment parameters SAPSYSTEMNAME, RSEC_SSFS_DATAPATH and RSEC_SSFS_KEYPATH must exist and have non-initial values [rsecssfs.c 4630]
4 ETW000 146 0.002630
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code -2 (message: SAP-Profile is not used; in this case, all three environment parameters SAPSYSTEMNAME, RSEC_SSFS_DATAPATH and RSEC_SSFS_KEYPATH must exist and have non-initial values) [rsecssfs.c 940]
4 ETW000 77 0.002707
4 ETW000 [dbcon.c ,00000] *** ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=-2 : SAP-Profile is not used; in this case, all three environment parameters SAPSYSTEMNAME, RSEC_SSFS_DATAPATH and RSEC_SSFS_KEYPATH must exist and have non-initial values
4 ETW000 56 0.002763
4 ETW000 [ dev trc,00000] read_ssfs_record(): deregister callback ssfs_dbi_trace 21 0.002784
4 ETW000 [dbcon.c ,00000] *** ERROR => Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS
4 ETW000 35 0.002819
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=41=DBSL_CMD_RELINFO_GET) 30 0.002849
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=14=DBSL_CMD_VERSION_GET) 22 0.002871
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=50=DBSL_CMD_GET_PATCH_INFO) 23 0.002894
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=13=DBSL_CMD_VENDOR_NAME_GET) 57 0.002951
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=52=DBSL_CMD_GET_DBLIB_VERSION) 22 0.002973
4 ETW000 [ dev trc,00000] -> 'OCI_10201_SHARE, ' 23 0.002996
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'ECD'"
I have already set the RSEC_SSFS_DATAPATH, RSEC_SSFS_KEYPATH in RZ10 and ennviprnment variables but still facing the issue.
Regards
Nitin
